Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
690User Manual 1335.5337.02 ─ 05
The setting affects only the settings of the first MSO bus (Logic1).
You can set the technology value for all buses with PBUS<pb>:TECHnology.
Suffix:
<m>
.
0..15
The suffix is irrelevant.
Parameters:
<Technology> V15 | V25 | V165 | V125 | V09 | VM13 | V38 | V20 | V0 | MANual
See PBUS<pb>:TECHnology.
Usage: Asynchronous command
DIGital<m>:THCoupling
<State>
Sets the threshold and the hysteresis for all digital channels of Logic1 to the same
value.
Suffix:
<m>
.
0..15
The suffix is irrelevant.
Parameters:
<State> ON | OFF
Usage: Asynchronous command
DIGital<m>:THReshold <Value>
Sets the logical threshold for the channel group to which the indicated digital channel
belongs.
The setting affects only the settings of the first MSO bus (Logic1).
You can set the threshold for all buses with PBUS<pb>:TECHnology or PBUS<pb>:
THReshold<n>
See also: DIGital<m>:THCoupling on page 690
Suffix:
<m>
.
0..15
Number of the digital channel.
Channel groups: 0..3; 4..7; 8..11; 12..15
Parameters:
<Value>
Usage: Asynchronous command
17.17.2 Logic configuration
The following commands configure the four logic groups of R&S MXO4-B1.
Mixed signal option (option R&S
MXO4-B1)
Loading ...
Loading ...
Loading ...