Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
578User Manual 1335.5337.02 ─ 05
FRANalysis:POINts:TOTal <TotalPoints>
Set the total number of points for the FRA analysis, if FRANalysis:POINts:MODE
on page 577 is set to TOTal.
Parameters:
<TotalPoints> Range: 10 to 5000
Increment: 1
*RST: 100
Usage: Asynchronous command
Manual operation: See "Points" on page 245
FRANalysis:REPeat
<Repeat>
Repeats the measurement, using the same parameters.
Parameters:
<Repeat> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Repeat" on page 245
FRANalysis:RESet
Resets the frequency response analysis.
Usage:
Setting only
Asynchronous command
FRANalysis:PHASe:MAXimum <MaxPhase>
Sets the upper boundary of the vertical phase window.
The lower boundary is given by "Maximum phase" - 360°.
By default, the "Maximum phase" is set to 180° for a phase window ranging from -180°
to 180° accordingly.
Parameters:
<MaxPhase> Range: 0 to 360
Increment: 1
*RST: 180
Default unit: °
Usage: Asynchronous command
Manual operation: See "Maximum phase" on page 248
Applications
Loading ...
Loading ...
Loading ...