Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
612User Manual 1335.5337.02 ─ 05
TRIGger:I2C:TYPE.........................................................................................................612
TRIGger:I2C:ACCess..................................................................................................... 612
TRIGger:I2C:ACONdition................................................................................................613
TRIGger:I2C:ADDRess...................................................................................................613
TRIGger:I2C:ADDTo.......................................................................................................613
TRIGger:I2C:ADNack..................................................................................................... 613
TRIGger:I2C:AMODe..................................................................................................... 614
TRIGger:I2C:DCONdition................................................................................................614
TRIGger:I2C:DMIN.........................................................................................................614
TRIGger:I2C:DPOSition..................................................................................................614
TRIGger:I2C:DRNack.....................................................................................................615
TRIGger:I2C:DWNack.................................................................................................... 615
TRIGger:I2C:TYPE <Type>
Selects the trigger type for I²C analysis.
Parameters:
<Type> STARt | REPStart | STOP | NACK | ADDRess | DATA | ADAT
STARt
Start condition
REPStart
Repeated start - the start condition occurs without previous stop
condition.
STOP
Stop condition, end of frame
NACK
Missing acknowledge bit. To localize specific missing acknowl-
edge bits, use:
TRIGger:I2C:ADNack
TRIGger:I2C:DWNack
TRIGger:I2C:DRNack
ADDRess
Triggers on one specific address
DATA
Triggers on a specific data
ADAT
Triggers on a combination of address and data condition.
*RST:
STARt
Usage: Asynchronous command
Manual operation: See "Type" on page 301
TRIGger:I2C:ACCess <RWBitAddress>
Toggles the trigger condition between read and write access of the primary. Select
"Either" if the transfer direction is not relevant for the trigger condition.
Protocols
Loading ...
Loading ...
Loading ...