Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
689User Manual 1335.5337.02 ─ 05
DIGital<m>:SIZE <Size>
Suffix:
<m>
.
0..15
The suffix is irrelevant.
Parameters:
<Size>
Usage: Asynchronous command
DIGital<m>:SKEW
<Skew>
Sets an individual delay for each digital channel to time-align it with other digital chan-
nels. The skew value compensates delays that are known from the circuit specifics or
caused by the different length of cables.
The setting affects only the settings of the first MSO bus (Logic1).
You can set the skew for all buses with PBUS<pb>:BIT<n>:SKEW.
Suffix:
<m>
.
0..15
Selects the digital channel.
Parameters:
<Skew>
Usage: Asynchronous command
DIGital<m>:STATe <State>
Enables or disables the indicated digital channel, displays it, and enables the Logic 1 if
the bus was disabled.
If another active bus already uses the selected digital channel, the instrument disables
the other bus to avoid conflicts.
For Logic 1, the DIG::STAT command has the same effect as PBUS<pb>:STATe. To
enable digital channels for buses 2, 3 and 4, use the PBUS:BIT[:STAT] command.
Suffix:
<m>
.
0..15
Selects the digital channel.
Parameters:
<State> ON | OFF
Usage: Asynchronous command
DIGital<m>:TECHnology <Technology>
Selects the threshold voltage for various types of integrated circuits and applies it to all
digital channels.
Mixed signal option (option R&S
MXO4-B1)
Loading ...
Loading ...
Loading ...