Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
509User Manual 1335.5337.02 ─ 05
REFCurve<rc>:RESCale:VERTical:STATe........................................................................ 511
REFCurve<rc>:TOORiginal.............................................................................................512
REFCurve<rc>:VMODe.................................................................................................. 512
REFCurve<rc>:SCALe <VerticalScale>
Sets the vertical scale in Volts per division. The vertical scale defines the displayed
amplitude of the selected waveform.
Suffix:
<rc>
.
1...4, index of the reference waveform
Parameters:
<VerticalScale> Range: 1E-15 to 1E+26
Increment: 1E-05
*RST: 0.5
Default unit: V/div
Usage: Asynchronous command
Manual operation: See "[Scale]" on page 39
REFCurve<rc>:POSition <VertPosi>
Available, if REFCurve<rc>:VMODe is set to INDependent.
Moves the reference waveform up or down in the diagram.
Suffix:
<rc>
.
1...4, index of the reference waveform
Parameters:
<VertPosi> Range: -1E+26 to 1E+26
Increment: 0.02
*RST: 0
Default unit: div
Usage: Asynchronous command
Manual operation: See "Vertical position" on page 190
REFCurve<rc>:HMODe <HorizontalMode>
Selects the coupling of horizontal settings.
Suffix:
<rc>
.
1...4, index of the reference waveform
Parameters:
<HorizontalMode> ORIGinal | COUPled
ORIGinal
Horizontal scaling and reference point of the source waveform
are used.
Waveform analysis
Loading ...
Loading ...
Loading ...