Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
611User Manual 1335.5337.02 ─ 05
SBUS<sb>:I2C:SDA:THReshold <Threshold>
Sets a user-defined threshold value for the data line.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<Threshold>
Usage: Asynchronous command
Manual operation: See "Threshold" on page 297
SBUS<sb>:I2C:SYMBols
<ShowSymbols>
Activates the symbol list to be used for decoding.
Suffix:
<sb>
.
1...4, index of the serial bus
Parameters:
<ShowSymbols> ON | OFF
*RST: OFF
Usage: Asynchronous command
Manual operation: See "Show symbols" on page 298
SBUS<sb>:I2C:NEWList <FileName>
Loads a symbol list file.
Suffix:
<sb>
.
1...4, index of the serial bus
Setting parameters:
<FileName> String parameter with path and file name.
Example:
SBUS1:I2C:NEWList
'home/storage/userData/Protocol/I2C.csv'
SBUS1:I2C:SYMBols ON
Usage: Setting only
Asynchronous command
Manual operation: See "Show symbols" on page 298
17.16.3.2 Trigger
Trigger commands for serial buses affect the current trigger source. Therefore, set the
trigger source to the required serial bus with TRIGger:EVENt<ev>:SOURce before
sending the bus-specific trigger commands.
Protocols
Loading ...
Loading ...
Loading ...