Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
700User Manual 1335.5337.02 ─ 05
PBUS<pb>:DATA[:VALues]?
Returns the data of the indicated logic.
Requirements:
●
PBUS<pb>:STATe is set to ON.
●
PBUS<pb>:DISPlay:SHBU is set to ON.
●
A number format is set with PBUS<pb>:DATA:FORMat.
Suffix:
<pb>
.
1...4, index of the logic group
Example:
PBUS:STAT ON
PBUS:DISP:SHBU ON
PBUS:DISP:BTYP COMB
PBUS:DATA:FORMat HEX
PBUS:DATA:VAL?
Usage: Query only
Asynchronous command
Manual operation: See "Data format" on page 351
17.18 Waveform generator (option R&S MXO4-B6)
This chaptes decribes the remote commands of the waveform generator.
The instrument preset does not affect the generator settings. Each generator has its
own preset: WGENerator<wg>:PRESet.
Some of the commands in the following chapter are asynchronous. An overlapping or
asynchronous command does not automatically finish executing before the next com-
mand starts executing. If overlapping commands must be executed in a defined order,
e.g. to avoid wrong measurement results, they must be serviced sequentially.
To prevent an overlapping execution of commands, one of the commands *OPC,
*OPC? or *WAI can be used after the command or a command set.
For more information, see:
●
www.rohde-schwarz.com/rc-via-scpi, chapter "Command Sequence and Synchro-
nization"
17.18.1 Waveform generator setup
17.18.1.1 General settings
WGENerator<wg>:ACOPy.............................................................................................. 701
WGENerator<wg>:FREQuency....................................................................................... 701
WGENerator<wg>:FUNCtion:PULSe[:WIDTh]...................................................................701
Waveform generator (option R&S
MXO4-B6)
Loading ...
Loading ...
Loading ...