Loading ...
Loading ...
Loading ...
Remote control commands
R&S
®
MXO 4 Series
575User Manual 1335.5337.02 ─ 05
Parameters:
<StopFrequency> Range: 0.01 to 100000000
Increment: 1
*RST: 10000
Default unit: Hz
Usage: Asynchronous command
Manual operation: See "Start, Stop" on page 244
FRANalysis:GENerator:AMPLitude <GenAmplitude>
Sets a fixed amplitude for the frequency response analysis.
Parameters:
<GenAmplitude> Range: 0.01 to 12
Increment: 0.1
*RST: 1
Default unit: Vpp
Usage: Asynchronous command
Manual operation: See "Amplitude" on page 245
FRANalysis:GENerator:LOAD <GenLoad>
Selects the generator voltage display for 50Ω or high impedance load.
Parameters:
<GenLoad> FIFTy | HIZ
HIZ: high input impedance
*RST: FIFTy
Usage: Asynchronous command
Manual operation: See "User load" on page 245
FRANalysis:GENerator[:CHANnel] <GenCh>
Selects the built-in generator to start a frequency sweep for a defined frequency range.
Parameters:
<GenCh> GEN1 | GEN2
*RST: GEN1
Usage: Asynchronous command
Manual operation: See "Generator" on page 244
FRANalysis:INPut[:SOURce] <InputChannel>
Sets the channel for the input signal of the DUT.
Applications
Loading ...
Loading ...
Loading ...