Loading ...
Loading ...
Loading ...
Effect parameters |74 3
Auto Reverse
This effect records the input signal and automatically plays it in reverse (the
effect is similar to a tape reverse sound).
Input
D-mod
Envelope Select
D
-mod
Envelope Control
Left
Right
FX Amt
FX Amt
FX Amt = 100: Mono In - Mono Out / FX Amt = 0: Stereo In - Stereo Out
+
Auto Reverse
Direct
Mix
Rec/Reverse Play
Control
a Rec Mode Single, Multi Sets the recording mode
b Reverse Time
[msec]
20…2640 Sets the maximum duration of the reverse playback
c Envelope Select D-mod, Input Selects whether the start and end of recording is con-
trolled via the modulation source or the input signal
level
Src Off…Tempo Selects the modulation source that controls record-
ing when Envelope Select is set to D-mod
d Threshold 0…100 Sets the recording start level when Envelope Select
is set to Input
e Response 0…100 Sets the speed of the response to the end of recording
f Direct Mix Always On,
Always Off,
Cross Fade
Selects how a dry sound is mixed
g Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources) at
the beginning of this part
Amt –100…+100 Amount of modulation source
a: Rec Mode
b: Reverse Time [msec]
When “Rec Mode” is set to Single, you can set up to 2,640msec for “Reverse
Time.” If recording starts during the reverse playback, the playback will be
interrupted.
Loading ...
Loading ...
Loading ...