Loading ...
Loading ...
Loading ...
162| Customizing and editing the Sound sets
Including the dry (direct) signal in the master effects
The dry (or ‘direct’) signal is the raw sound, without the effects. It should be
normally included in the signal coming out from the master effects, to give a
sense of presence of the sound’s source.
This parameter is not needed for the insert effects, since they always include
the dry signal.
1 Go to the Mixer/Tuning > Volume/Pan page.
2 Select or deselect the Dry checkbox corresponding to the Sound you want
to include or exclude.
Dry Meaning
On The direct signal is sent to the outputs, mixed with the master ef-
fects.
Sound
L/R Out
Master FX
Off The direct signal is removed from the audio outputs, that will only
contain the effected signal. With stereo effects, the effected signal
will still be positioned according to the Pan value.
This will work in a way similar to an insert effect, where all the dry
signal is always processed.
Sound L/R Out
Master FX
Loading ...
Loading ...
Loading ...