Loading ...
Loading ...
Loading ...
Effect parameters |611
St. Env. Phaser (Stereo Envelope Phaser)
This stereo phaser uses an envelope generator for modulation. You will ob-
tain the same pattern of phasing each time you play. You can also control the
Phaser directly using the modulation source.
EG Attack/Decay
EG
D-mod
Sweep Mode
D
-mod
Phaser
Phaser
Left
Right
Resonance
FX Amt
FX Amt
High Damp
Stereo In - Stereo Out
a L Manu Bottom 0…100 Sets the lower limit of the frequency range for the ef-
fect on the left channel
L Manu Top 0…100 Sets the upper limit of the frequency range for the ef-
fect on the left channel
b R Manu Bottom 0…100 Sets the lower limit of the frequency range for the ef-
fect on the right channel
R Manu Top 0…100 Sets the upper limit of the frequency range for the ef-
fect on the right channel
c Sweep Mode EG, D-mod Determines whether the flanger is controlled by the
envelope generator or by the modulation source
Src Off…Tempo Selects the modulation source that triggers the EG
(when EG is selected for Sweep Mode), or modula-
tion source that causes the flanger to sweep (when
D-mod is selected for Sweep Mode). See the list of DMS
(Dynamic Modulation Sources) at the beginning of this
part
d EG Attack 1…100 Sets the EG attack speed
EG Decay 1…100 Sets the EG decay speed
e Resonance –100…+100 Sets the resonance amount
f High Damp [%] 0…100 Sets the resonance damping amount in the high range
g Wet/Dry -Wet, -1:99…
Dry…99:1, Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources) at
the beginning of this part
Amt –100…+100 Amount of modulation source
Loading ...
Loading ...
Loading ...