Loading ...
Loading ...
Loading ...
638| Effects for the Sounds, Voice, Guitar
g Mic Distance 0…100 Sets the distance between the microphone and rotary
speaker
Mic Spread 0…100 Sets the angle of left and right microphones
h Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources) at
the beginning of this part
Amt –100…+100 Amount of modulation source
a: Mode
This parameter sets how the modulation source switches between rotation
and stop.
When
Mode = Toggle, the speaker rotates or stops alternately each time you
press the pedal or move the joystick. Via MIDI, rotation will switch between
start and stop each time the modulation amount exceeds 64.
When
Mode = Moment, the speaker rotates by default, and stops only when
you press the pedal or move the joystick. Via MIDI, modulation values above
64 make the speaker rotate, and values below 64 make it stop.
b: Speed Switch
This parameter controls how the rotation speed (slow and fast) is switched
via the modulation source.
When
Mode = Toggle, the speed will switch between slow and fast each time
you press the pedal or move the joystick. Via MIDI, the speed will switch each
time the modulation amount exceeds 64.
When
Mode = Moment, the speed is usually slow. It becomes fast only when
you press the pedal or move the joystick. Via MIDI, modulation values above
64 set the speed to Fast, and values below 64 set it to Slow.
c: Manual Speed Ctrl
If you wish to control the rotation speed manually, instead of switching be-
tween Slow and Fast, select a modulation source in the Manual Speed Ctrl
parameter. If you don’t want to use manual control, set this to Off.
Loading ...
Loading ...
Loading ...