Loading ...
Loading ...
Loading ...
Effect parameters |701
a: Frequency Bottom
a: Frequency Top
The sweep width and direction of the wah filter are determined by the
“Frequency Top” and “Frequency Bottom” settings.
Max
D
-mod
Frequency
Bottom=25
Top=75
Higher
Max
Zero
Higher
D
-mod
Frequency
Bottom=60
Top=30
Higher
Zero
Higher
Frequency
Bottom=25
Top=75
Higher
Frequency
Bottom=75
Top=25
Higher
Sweep Mode=Auto
Envelope
Envelope
Time
Wah
Woo
Woo
Woo
Envelope
Wah Wah
Time
Woo
Woo
Wah
Wah
Sweep Mode=D-mod
b: Sweep Mode
This parameter changes the wah control mode. Setting “Sweep Mode” to
Auto will select an auto-wah that sweeps according to envelope changes in
the input signal level. Auto-wah is frequently used for funk guitar parts and
clav sounds.
When “Sweep Mode” is set to D-mod, you can control the filter directly via
the modulation source in the same way as a wah pedal.
When “Sweep Mode” is set to LFO, the effect uses LFO to sweep in cycle.
c: Envelope Sens
This parameter sets the sensitivity of auto-wah. Increase the value if the in-
put signal is too low to sweep. Reduce the value if the input signal is so high
that the filter is stopped temporarily.
Loading ...
Loading ...
Loading ...