Loading ...
Loading ...
Loading ...
Effect parameters |597
e Depth 0…100 Sets the depth of LFO modulation
Src Off…Tempo Selects the modulation source of the LFO modula-
tion depth
Amt –100…+100 Sets the modulation amount of the LFO modula-
tion depth
f High/Low Split
Point
1…100 Sets the frequency split point between the low and
high range
g Feedback –100…+100 Sets the feed back amount of the chorus block
High Damp [%] 0…100 Sets the high range damping amount of the chorus
block
h Low Level 0…100 Sets the low range output level
High Level 0…100 Sets the high range (chorus) output level
i Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation Sources)
at the beginning of this part
Amt –100…+100 Amount of modulation source
f: High/Low Split Point
This parameter sets the frequency that splits the high and low range. Only
the high range will be sent to the chorus block.
g: Feedback
Sets the feedback amount of the chorus block. Increasing the feedback will
allow you to use the effect as a flanger.
Loading ...
Loading ...
Loading ...