Loading ...
Loading ...
Loading ...
736| Effects for the Sounds, Voice, Guitar
e Depth 0…100 Sets the depth of the sampling frequency LFO
modulation
Src Off…Tempo Selects the LFO modulation source of the sam-
pling frequency
Amt –100…+100 Sets the LFO modulation amount of the sam-
pling frequency
f Resolution 4…24 Sets the data bit length
g Output Level 0…100 Sets the output level
Src Off…Tempo Selects the modulation source for the output
level
Amt –100…+100 Sets the modulation amount of the output level
h Wet/Dry Dry, 1:99…99:1,
Wet
Balance between the wet and dry signal
Src Off…Tempo See the list of DMS (Dynamic Modulation
Sources) at the beginning of this part
Amt –100…+100 Amount of modulation source
a: Pre LPF
If a sampler with a very low sampling frequency receives very high-pitched
sound that could not be heard during playback, it could generate pitch noise
that is unrelated to the original sound. Set “Pre LPF” to On to prevent this
noise from being generated.
If you set the “Sampling Freq” to about 3 kHz and set “Pre LPF” to Off, you
can create a sound like a ring modulator.
f: Resolution
g: Output Level
If you set a smaller value for the “Resolution” parameter, the sound may
be distorted. The volume level may also be changed. Use “Output Level” to
adjust the level.
Loading ...
Loading ...
Loading ...