Loading ...
Loading ...
Loading ...
Editing the Sounds |431
Modulating the Filter EG times
▪ Use the Time Modulation > AMS 1/2 parameters to select a modulation
source for the Time parameters of the filter EG.
▪ Use the Time Modulation > Intensity parameters (-99…+99) to specify the
depth and direction of the effect that the AMS will have on the Time param-
eters. With a setting of 0, the filter EG times will be just as specified by the
Time settings.
For example, if the AMS is set to FltKTr +/+, the EG Time parameters will be
controlled by the Keyboard Tracking settings. With positive (+) values of this
parameter, positive (+) values of Ramp Low/High will lengthen the EG times,
and negative (–) values of Ramp Low/High will shorten the EG times. The
direction of change is specified by At (Attack Time Swing), Dc (Decay Time
Swing), Sl (Slope Time Swing), and Rl (Release Time Swing).
With a setting of 0, the times specified by the Frequency parameter will be
used.
If the AMS is set to Velocity, positive (+) values of this parameter will cause
EG times to lengthen as you play more strongly, and negative (–) values will
cause EG times to shorten as you play more strongly.
▪ Use the At (Attack Time Swing), Dc (Decay Time Swing), Sl (Slope Time
Swing) and Rl (Release Time Swing) parameters to specify the direction
in which the AMS will affect the Time > Attack, Decay, Slope and Release
parameters.
With positive (+) values of Intensity, a setting of + will cause the time to be
lengthened, and a setting of – will cause the time to be shortened. With a set-
ting of 0 there will be no change.
Filter 1 EG changes (Time) (AMS = Velocity, Intensity = a positive (+) value)
Note-on
Note-off
Note-on
Note-off
Note-on
Note-off
Softly played note with Attack,
Decay, Slope and Release
Level Swings set to +
Strongly played note with
Attack, Decay, Slope and
Release Level Swings set to +
Strongly played note with
Attack, Decay, Slope and
Release Level Swings set to –
Loading ...
Loading ...
Loading ...