Loading ...
Loading ...
Loading ...
89
5. CLI Commands
show output
Use the show output command to display the settings for the output contacts of the sensor.
Syntax
show output
Examples
The following command displays the output settings for sensor “E2MTDO-456” connected to device “PDU-Rack1”:
console> device (PDU-Rack1)> sensor (E2MTDO-456)> show output
NAME TYPE VALUE
------------------ -------------- ---------------------
Contact Output 1 Environment Open
..Alarm Level Normally Open
..Description Contact Output #1
Contact Output 2 Environment Open
..Alarm Level Normally Open
..Description Beacon 12-A
Hardware Conguration Device
..Contact Output Count 2
device: sensor: region
region
Use the region command to optionally enter a description of the geographical area where the sensor is located. By default,
this information will match the region entered on the device to which the sensor is connected. Use the no form of this
command to clear the information.
Syntax
region <region>
no region
• region - Specifies geographical information pertaining to the sensor. If spaces are required, bookend the information with
quotation marks (“).
Examples
The following command sets “Chicago” as the region for sensor “Temp1”, associated with device “PDU123”:
console> device (PDU123)> sensor (Temp1)> region Chicago
Update complete
Loading ...
Loading ...
Loading ...