Loading ...
Loading ...
Loading ...
14
5. CLI Commands
show enable
Use the show enable command to display the enabled/disabled status for the action entry.
Syntax
show enable
Examples
The following command displays the status of entry “UPS Check”:
console> action (UPS Check)> show enable
disabled
action: interval
interval
Use the interval command to set the amount of time, in seconds, between successive executions of a triggered On Set
action. Actions will stop executing once the trigger condition clears. Use the count command to set the number of times the
action will execute. This command applies only to action types “email”, “sms”, “snmp-set-oid” and “snmp-trap”.
Syntax
interval <interval>
• interval – Specifies the interval time, in seconds, for the entry (Range: 0-65535).
Examples
The following command sets the interval time at 2 minutes for entry “Send Email”:
console> action (Send Email)> interval 120
Update complete
show interval
Use the show interval command to display the interval time for the action entry.
Syntax
show interval
Examples
The following command displays the interval time, in seconds, for entry “Send Email”:
console> action (Send Email)> show interval
120
Loading ...
Loading ...
Loading ...