Loading ...
Loading ...
Loading ...
20
5. CLI Commands
show snmp-set
Use the show snmp-set command to display the OID details for an SNMP Set action entry. This command is applicable only
to action type “snmp-set oid”.
Syntax
show snmp-set [oid | value]
Examples
The following command displays the OID details for entry “Notify Server #1”:
console> action (Notify Server #1)> show snmp-set
OID : 1.3.6.1.4.1.123.4.5.6.0
Type : integer
Value : 1
action: target-device
target-device
Use the target-device command to specify the device or sensor undergoing the action, as defined by the action entry. Note
that changing the target device of an action entry will require re-entering all action parameters; the parameters associated with
the previous target device will be erased. Use the show targets command to display a list of devices and sensors available for
selection as target devices.
Syntax
target-device {<device-name> | <sensor-name>}
• device-name – Specifies the new target device associated with the entry.
• sensor-name – Specifies the new target sensor associated with the entry.
Examples
The following command sets “Sensor-E2MTDO” as the new target device for entry “Indicator”:
console> action (Indicator)> target-device Sensor-E2MTDO
Update complete
show target-device
Use the show target-device command to display the name of the device or sensor selected to undergo the action.
Syntax
show target-device
Examples
The following command displays the target device for entry “Indicator”:
console> action (Indicator)> show target-device
Sensor-E2MTDO
Loading ...
Loading ...
Loading ...