Loading ...
Loading ...
Loading ...
13
5. CLI Commands
action: delay
delay
Use the delay command to set the time that a triggered On Set action must wait before it executes. Actions will not execute if
the trigger condition clears before the delay time elapses. The default value for delay is zero (0), which will cause the action to
execute immediately when triggered.
Syntax
delay <delay>
• delay – Specifies the delay time, in seconds, for the action entry.
Examples
The following command sets a delay time of 30 seconds for entry “Send Email”:
console> action (Send Email)> delay 30
Update complete
show delay
Use the show delay command to display the delay time for the action entry.
Syntax
show delay
Examples
The following command displays the delay time for entry “Send Email”:
console> action (Send Email)> show delay
30
action: enable
enable
Use the enable command to activate the action entry. Use the no form of this command to disable the entry. A disabled
action will not execute when a trigger condition occurs.
Syntax
enable
no enable
Example
The following command disables entry “UPS Check”:
console> action (UPS Check)> no enable
Update complete
Loading ...
Loading ...
Loading ...