Loading ...
Loading ...
Loading ...
148
5. CLI Commands
radius-server: test
test
Use the test command to test authenticated communications to the RADIUS server entry. On executing this command,
prompts will appear for entering the access credentials for the entry.
Syntax
test
Examples
The following command executes a communication test of entry “RADIUSsrvr1”:
console> radius-server (RADIUSsrvr1)> test
Username: Admin123
Password:
Testing...complete
Successful - 3/24/2020 4:34:56 PM
show test
Use the show test command to display the metrics of the last communications test of the RADIUS Server entry.
Syntax
show test
Examples
The following command displays the last test metrics of entry “RADIUSsrvr1”:
console> radius-server (RADIUSsrvr1)> show test
Successful - 3/24/2020 4:34:56 PM
reboot
reboot
Use the reboot command to gracefully shut down and then power up the device’s network interface, i.e. the “LX Card”. When
the command is issued, a prompt will appear to confirm the action. Use the force option to execute the restore without
confirmation. This operation does not power cycle the device itself nor any outlet on the device. Note: rebooting the LX Card
will terminate all active sessions.
Syntax
reboot [force]
Examples
The following command executes a reboot of the device’s network interface, with confirmation prompt:
console> reboot
This will gracefully shut down and then power up the device’s network interface. This
operation will not power cycle the device itself or any outlet on the device.
NOTE: a reboot will terminate all active sessions
Are you sure? Type “yes” to proceed:
Loading ...
Loading ...
Loading ...