Loading ...
Loading ...
Loading ...
26
5. CLI Commands
show autoprobe
Use the show autoprobe command to view a summary table of all AutoProbe entries or the details of a specified AutoProbe
entry.
Syntax
show autoprobe [ntp | ping | snmp]
Examples
The following command displays a summary table of all AutoProbe entries:
console> show autoprobe
NAME TYPE DESCRIPTION STATUS PRIMARY IP P PORT
-------- ----- --------------- --------- ------------- ------
probe ABC ping Monitor switch enabled 172.17.77.77 161
probe 123 ntp NTP server disabled 192.168.5.100 162
SnmpProbe snmp Get status enabled 172.17.77.88 163
autoprobe: authentication
authentication passphrase
Use the authentication passphrase command to enter an authentication passphrase for the SNMP (v3) GET AutoProbe
entry. A passphrase is required if security-mode is set to either authnopriv or authpriv. Two options are available for entering
the password. The first option will prompt the entry of a password followed by a password confirmation, neither of which will be
echoed to the terminal. The second option allows entry of a plain text password on the command line by using the plaintext
keyword.
Syntax
authentication passphrase [plaintext <passphrase>]
• passphrase – Specifies the authentication passphrase for the SNMP GET AutoProbe entry, in plain text.
Examples
The following command sets the Authentication Passphrase to “a1b2c3” for entry “Probe Get”:
console> autoprobe (Probe Get)> authentication passphrase plaintext a1b2c3
Update complete
authentication protocol
Use the authentication protocol command to select an Authentication Protocol for the SNMP (v3) GET AutoProbe entry. A
protocol selection is required if security-mode is set to either authnopriv or authpriv. The available options are MD5 and
SHA1.
Syntax
authentication protocol {md5 | sha1}
Examples
The following command sets the Authentication Protocol to SHA1 for entry “Probe Get”:
console> autoprobe (Probe Get)> authentication protocol sha1
Update complete
Loading ...
Loading ...
Loading ...