Loading ...
Loading ...
Loading ...
17
5. CLI Commands
action: name
name
Use the name command to modify the name of the action entry.
Syntax
name <new-name>
• new-name – Specifies the new name for the entry. If spaces are required, bookend the name with quotation marks (“).
Examples
The following command changes the entry’s name from “Send Email” to “Email Manager”:
console> action (Send Email)> name “Email Manager”
Update complete
console> action (Email Manager)>
show name
Use the show name command to display the name of the action entry.
Syntax
show name
Examples
The following command displays the name of the entry:
console> action (Email Manager)> show name
Email Manager
action: output-contact
output-contact
Use the output-contact command to specify the output contact behavior for the action entry – to either turn on or turn off,
when triggered. This command is applicable only to action type “sensor” and, specifically, sensor model E2MTDO. Ensure that
the specific E2MTDO is selected using the target-device command.
Syntax
output-contact <number> {on | off}
• number – Specifies the output contact number of the sensor.
Examples
The following command sets the #2 contact to turn on when triggered, for entry “Fan On”:
console> action (Fan On)> output-contact 2 on
Update complete
Loading ...
Loading ...
Loading ...