Loading ...
Loading ...
Loading ...
34
5. CLI Commands
secondary port
Use the secondary port command to set the port number of the second network device that the entry will probe. This
command applies only to NTP and SNMP probes.
Syntax
secondary port <port-number>
• port-number – Specifies the port number of the second network device that the entry will use for probe tests (Range:
1-65535).
Examples
The following command specifies “161” as the secondary port for entry “SnmpProbe”:
console> probe (SnmpProbe)> secondary port 161
Update complete
show secondary
Use the show secondary command to display the secondary address, OID and port settings for the AutoProbe entry.
Syntax
show secondary [address | oid | port]
Examples
The following command displays the secondary address, OID and port settings for entry “SnmpProbe”:
console> probe (SnmpProbe)> show secondary
Secondary Address : 172.17.77.89
Secondary Oid : 1.3.6.1.2.1.1.3.0
Secondary Port : 161
autoprobe: security-mode
security-mode
Use the security-mode command to change the default Privacy setting of the SNMP (v3) GET probe entry. The default setting
is “No Authentication and No Privacy” (noauthnopriv). The other available choices are: “Authentication and No Privacy”
(authnopriv), “Authentication and Privacy” (authpriv).
Syntax
security-mode {noauthnopriv | authnopriv | authpriv}
Examples
The following command sets the Security Mode to “Authentication and Privacy” for entry “Probe Get”:
console> autoprobe (Probe Get)> security-mode authpriv
Update complete
Loading ...
Loading ...
Loading ...