Loading ...
Loading ...
Loading ...
27
5. CLI Commands
show authentication protocol
Use the show authentication protocol command to display the selected authentication protocol for the SNMP (v3) GET
AutoProbe entry.
Syntax
show authentication protocol
Examples
The following command displays the authentication protocol for entry “Probe Get”:
console> autoprobe (Probe Get)> show authentication protocol
sha1
autoprobe: community
community
Use the community command to enter a community string for an SNMP (v1 or v2) GET AutoProbe entry. A community string
must be specified prior to enabling the entry. Two options are available for entering the community string. The first option will
prompt the entry of a password followed by a password confirmation, neither of which will be echoed to the terminal. The
second option allows entry of a plain text community string on the command line by using the plaintext keyword.
Syntax
community [plaintext <community-string>]
• community-string – Specifies the community string for the entry, in plain text.
Examples
The following command sets “public” as the community string for SNMP GET probe entry “ProbeGet”:
console> autoprobe (ProbeGet)> community plaintext public
Update complete
autoprobe: description
description
Use the description command to optionally enter a description for the AutoProbe entry. Use the no form of this command to
clear the description.
Syntax
description <description>
no description
• description – Specifies a description for the entry. If spaces are required, bookend the description with quotation marks (“).
Examples
The following command sets “Monitor network switch” as the description for entry “probe ABC”:
console> probe (probe ABC)> description “Monitor network switch”
Update complete
Loading ...
Loading ...
Loading ...