Loading ...
Loading ...
Loading ...
184
5. CLI Commands
show name
Use the show name command to display the name entered for the SNMP server entry.
Syntax
show name
Examples
The following command displays the entry’s name:
console> snmp-server (Server XYZ)> show name
Server XYZ
snmp-server: privacy
privacy passphrase
Use the privacy passphrase command to enter a privacy passphrase for the SNMP (v3) server entry. A passphrase is required
if security-mode is set to authpriv. Two options are available for entering the passphrase. The first option will prompt the
entry of a passphrase followed by a passphrase confirmation, neither of which will be echoed to the terminal. The second
option allows entry of a plain text passphrase on the command line by using the plaintext keyword.
Syntax
privacy passphrase [plaintext <passphrase>]
• passphrase – Specifies the passphrase for the entry, in plain text.
Examples
The following command sets the Privacy Passphrase to “g2h3j4” for entry “SRVrcvr1”:
console> snmp-server (SRVrcvr1)> privacy passphrase plaintext g2h3j4
Update complete
privacy protocol
Use the privacy protocol command to select a Privacy Protocol. A protocol selection is required if security-mode is set to
authpriv. The available options are DES and AES.
Syntax
privacy protocol {des | aes}
Examples
The following command sets the Privacy Protocol to 128-bit AES for entry “SRVrcvr1”:
console> snmp-server (SRVrcvr1)> privacy protocol aes
Update complete
Loading ...
Loading ...
Loading ...