Loading ...
Loading ...
Loading ...
84
5. CLI Commands
device: sensor: date-installed
date-installed
Use the date-installed command to modify the date that the device was installed. The default value is the current date.
Syntax
date-installed <date>
• date – Specifies the date of the installation in the format selected using the default date-format or default user date-
format command
Example
The following command sets October 16, 2020 as the installation date for sensor “Temp1”, associated with device “PDU123”:
console> device (PDU123)> sensor (Temp1)> date-installed 10/16/2020
Update complete
show date-installed
Use the show date-installed command to display the entered installation date.
Syntax
show date-installed
Examples
The following command displays the installation date for sensor “Temp1”, associated with device “PDU123”:
console> device (PDU123)> sensor (Temp1)> show date-installed
10/16/2020
device: sensor: humidity
humidity
Use the humidity command to set the low-critical and high-critical threshold values and tolerance that define the
operational bounds for humidity measurements. The tolerance defines the margin that a humidity measurement must exceed
before triggering another threshold event; the sole setting applies to both the low-critical and high-critical thresholds.
Syntax
humidity threshold {low-critical | high-critical} <integer-value>
humidity threshold tolerance <integer-value>
• integer-value – Specifies the value for the threshold or tolerance.
Examples
The following command sets 44% as the low-critical humidity threshold for sensor “E2MTHDI”, associated with device “PDU123”:
console> device (PDU123)> sensor (E2MTHDI)> humidity threshold low-critical 44
Update complete
The following command sets 3% as the humidity threshold tolerance for sensor “E2MTHDI”, associated with device “PDU123”:
console> device (PDU123)> sensor (E2MTHDI)> humidity threshold tolerance 3
Update complete
Loading ...
Loading ...
Loading ...