Loading ...
Loading ...
Loading ...
16
5. CLI Commands
action: load-group
load-group
Use the load-group command to assign one or more load groups to an action. Note that load groups are created using the
device-level load-group command. Use the no form of this command to remove one or more load groups from the action.
This command applies only to action type “load-group”.
Syntax
load-group <group-1>[,<group-2>...<group-N>]
• group-x – Specifies a comma-delimited list of load groups to be assigned to the action.
no load-group [<group-1>[,<group-2>...<group-N>]]
• group-x – Specifies a comma-delimited list of load groups to be removed from the action.
Examples
The following two commands clear the action of load groups, then assign load groups “Routers1” and “Routers2” to entry
“Cycle Router”:
console> action (Cycle Router)> no load-group
Update complete
console> action (Cycle Router)> load-group Routers1,Routers2
Update complete
load-group state
Use the load-group state command to specify the load group behavior when the action is executed. This command applies
only to action type “load-group”.
Syntax
load-group state {cycle | off | on}
Examples
The following command configures the load groups specified in entry “Cycle Router” to cycle when triggered:
console> action (Cycle Router)> load-group state cycle
Update complete
show load-group
Use the show load-group command to display the load group details for the action entry. This command applies only to
action type “load-group”.
Syntax
show load-group [state]
Examples
The following command displays the load group details for entry “Cycle Router”:
console> action (Cycle Router)> show load-group
Load Action : cycle
Load Groups : Routers1,Routers2________________________________________
Loading ...
Loading ...
Loading ...