Loading ...
Loading ...
Loading ...
49
5. CLI Commands
show avr
Use the show avr command to display the recorded count of AVR transitions.
Syntax
show avr
Examples
The following command displays the recorded AVR transition count for device “UPS123”:
console> device (UPS123)> show avr
3
device: battery
battery age threshold
Use the battery age threshold command to configure age-related threshold parameters of the battery. This command is valid
only for devices that support battery age threshold.
Syntax
battery age threshold {high-warning| high-critical} <decimal-value>
• decimal-value – Sets the time (in years) as the age threshold for the specified severity level.
battery age threshold tolerance <tolerance>
• tolerance – Sets the time (in years) that must be exceeded for the threshold event to trigger again
Example
The following command sets the high-warning battery age threshold as 3.25 on device “UPS123”:
console> device (UPS123)> battery age threshold high-warning 3.25
Update complete
The following command sets the battery age threshold tolerance as 0.5 on device “UPS123”:
console> device (UPS123)> battery age threshold tolerance 0.5
Update complete
battery date installed
Use the battery date installed command to enter a date on which the internal battery was installed.
Syntax
battery date installed <date>
• date - Specifies the date, in the format selected using the default date-format or default user date-format command.
Example
The following command sets March 3, 2020 as the battery installation date for device “UPS123”:
console> device (UPS123)> battery date installed 3/3/2020
Update complete
Loading ...
Loading ...
Loading ...