Loading ...
Loading ...
Loading ...
36
5. CLI Commands
autoprobe: username
username
Use the username command to enter or modify the username for the SNMP (v3) GET AutoProbe entry.
Syntax
username <username>
• username – Specifies a username for the entry. Note: spaces are not allowed in SNMPv3 usernames.
Examples
The following command sets “System123” as the username for entry “Probe Get”:
console> autoprobe (Probe Get)> username System123
Update complete
show username
Use the show username command to display the username entered for the SNMP GET AutoProbe entry.
Syntax
show username
Examples
The following command displays the username entered for entry “Probe Get”:
console> autoprobe (Probe Get)> show username
System123
autoprobe: version
version
Use the version command to modify the SNMP version of the SNMP GET probe entry. Note that switching the SNMP version
from v1/v2 to v3 – or vice-versa – will require entering parameters associated with the new version. The settings for the original
version will be retained, but not used. For example, switching from v2 to v3 will hide the community setting and will require
setting parameters for authentication, privacy, security-mode and username.
Syntax
version {v1 | v2 | v3}
Examples
The following command changes the SNMP version of entry “Probe Get” to v2:
console> autoprobe (Probe Get)> version v2
Update complete
Loading ...
Loading ...
Loading ...