Loading ...
Loading ...
Loading ...
– 95 –
Chapter 4 Operation — Menu settings
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
f [4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]
(Factory setting: [OFF])
[FRAME LEVEL]
Sets the level for outside of the frame marker.
[0] Equivalent to when signal is off (blanking status).
[1]…[14] Becomes brighter as the number becomes higher.
[15] Becomes same brightness as the center area.
(Factory setting: [15])
[FRAME COLOR]
Sets the color of the frame marker.
The items that can be set are as follows.
f [WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
(Factory setting: [WHITE])
[FOCUS ASSIST]
[FOCUS ASSIST SELECT]
Sets the focus assist method when the USER button assigned with [FOCUS ASSIST] is operated.
[EXPAND] Sets the enlarged display.
[PEAKING] Sets the peaking display.
[SQUARES] Sets the focus square display.
[EXPAND+PEAKING] Displays in the combination of [EXPAND] and [PEAKING].
[EXPAND+SQUARES] Displays in the combination of [EXPAND] and [SQUARES].
(Factory setting: [EXPAND])
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC] Disables the enlarged display function after ten seconds have elapsed.
[HOLD] Enables the enlarged display function until the <FOCUS ASSIST> button or the USER button assigned with [EXPAND] is
pressed.
[UNTIL REC] Enables the enlarged display function until recording starts.
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
f [×2], [×3], [×4]
(Factory setting: [×2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
f [LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
f [RED], [GREEN], [WHITE]
(Factory setting: [RED])
[BLACK & WHITE]
Enables/disables the monochrome display.
[ON] Enables the monochrome display.
[OFF] Disables the monochrome display.
[DURING PEAKING] Enables the monochrome display while the peaking display is enabled.
(Factory setting: [OFF])
[DETAIL]
Sets the intensity of the contour for the video to make it easier to focus.
Loading ...
Loading ...
Loading ...