Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/24937455-aj-cx4000gj/bge4.png)
– 228 –
Chapter 10 Maintenance — Warning system
Recording or playback operation Recording will stop.
Action to take Delete clips in the memory card or insert a new memory card.
6 Recording error
Status display Does not display.
Warning lamp Flashes four times per second.
Tally lamp Flashes four times per second.
Card access lamp All card access lamps ash four times per second in orange.
Viewnder
[REC WARNING] is displayed.
f [REC WARNING]/[<OVER MAX NUM. OF CLIPS>] is displayed when you try to record exceeding the limit for number
of clips.
f This is displayed after approximately 3.5 hours have elapsed from the point of starting a single recording when
[SHORT SPLIT] is selected in the [RECORDING] menu → [FILE SPLIT]. Recording is stopped.
f [TEMPORARY PAUSE]/[IRREGULAR SIG] is displayed when the genlock reference signal is not correctly received.
Alarm Sounds four times per second.
Warning content This is a recording or recording circuit setting error.
Recording or playback operation
Recording will stop. When the reference signal for genlock is not correctly received, pause the recording, and resume
the recording when the signal returns to normal.
Action to take
Start recording again. Or, turn the power off once and then start recording again.
To record exceeding the maximum numbers of the clips, replace the memory card or delete unnecessary clips.
7 Card error
Status display Does not display.
Warning lamp
Flashes four times per second when occurring during recording.
It does not illuminate when it occurs during playback.
Tally lamp
Flashes four times per second when occurring during recording.
It does not illuminate when it occurs during playback.
Card access lamp All card access lamps ash four times per second in orange when occurring during recording.
Viewnder Displays [CARD ERROR <SLOT 1>] (corresponding card slot number is displayed).
Alarm
Sounds four times per second when occurring during recording.
It does not sound when it occurs during playback.
Warning content A memory card error occurred during recording or playback.
Recording or playback operation The current operation will stop. The memory card with the error is write-protected after it is stopped.
Action to take Replace the memory card.
8 Reduced wireless audio reception
Status display Does not display.
Warning lamp Flashes four times per second. (When idle or during recording)
Tally lamp Flashes four times per second while recording is continued.
Viewnder [WIRELESS RF] is displayed.
Alarm Sounds four times per second while recording is continued.
Warning content The error indicates poor wireless audio reception conditions.
Recording or playback operation The current operation will continue.
Action to take Check the microphone power supply and the reception status of the receiver.
9 Battery near end
Status display One battery charge level bar ashes.
Warning lamp Flashes once per second.
Tally lamp Flashes once per second.
Viewnder
The [BATT] lamp ashes once per second if the viewnder has the [BATT] lamp. ([%] indication ashes if the battery has
information of remaining capacity.)
Alarm Sounds four times per second.
Warning content The battery is about to run out.
Recording or playback operation The current operation will continue.
Action to take Change the batteries as needed.
10 Memory card recording near end
Status display One remaining memory card capacity level bar ashes.
Warning lamp Flashes once per second while recording is continued.
Tally lamp Flashes once per second while recording is continued.
Viewnder The remaining memory card capacity indicator ashes.
Alarm Sounds once per second while recording is continued.
Warning content The remaining memory card capacity totals 2 minutes or less.
Recording or playback operation The current operation will continue.
Action to take Change the memory card or insert an additional card as needed.
Loading ...
Loading ...
Loading ...