Panasonic AJ-CX4000GJ Pro 4K/HDR Streaming Camcorder with B4 Lens Mount

User Manual - Page 63

For AJ-CX4000GJ.

PDF File Manual, 245 pages, Read Online | Download pdf file

AJ-CX4000GJ photo
Loading ...
Loading ...
Loading ...
63 –
Chapter 4 Operation — Menu settings
[CAMERA] menu
Sets the basic camera function.
This menu cannot be set when the thumbnail screen is displayed.
[SHUTTER SPEED]
The items that can be set in [POSITION1] to [POSITION6] are as follows.
f When the [SYSTEM] menu [FREQUENCY] [59.94Hz] is set
-[OFF], [1/100], [1/120], [1/250], [1/500], [1/1000], [1/2000], [HALF]
f When the [SYSTEM] menu [FREQUENCY] [50.00Hz] is set
-[OFF], [1/60], [1/120], [1/250], [1/500], [1/1000], [1/2000], [HALF]
[SYNCHRO SCAN] [SYNCHRO SCAN] is assigned as the shutter speed selected by the <SHUTTER> switch.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [ON])
[POSITION1] Sets the shutter speed of [POSITION1].
f The factory setting varies depending on the [SYSTEM] menu [FREQUENCY] setting.
(Factory setting: [1/100] (when [59.94Hz] is set), [1/60] (when [50.00Hz] is set))
[POSITION2] Sets the shutter speed of [POSITION2].
(Factory setting: [1/120])
[POSITION3] Sets the shutter speed of [POSITION3].
(Factory setting: [1/250])
[POSITION4] Sets the shutter speed of [POSITION4].
(Factory setting: [1/500])
[POSITION5] Sets the shutter speed of [POSITION5].
(Factory setting: [1/1000])
[POSITION6] Sets the shutter speed of [POSITION6].
(Factory setting: [1/2000])
[SW MODE]
[RET SW]
Sets the function when the <RET> button on the lens is pressed.
[INHIBIT] Does not assign a function.
[D.ZOOM] Assigns the digital zoom function. Zooms in on the eld angle by 2x, 3x and 4x vertically and horizontally.
[FOCUS ASSIST] Displays/hides the focus assist display.
Select the type of display in the [VIDEO OUT/LCD/VF] menu [FOCUS ASSIST] [FOCUS ASSIST SELECT].
[REC CHECK] Automatically plays back the last approximately three seconds of the previously shot clip.
[LCD/VF DETAIL] Emphasizes the contour of the image in the viewnder or LCD monitor to make it easier to focus.
[VF COLOR] Selects whether to display viewnder images in color or in black and white.
This is interlocked with the setting value in the [VIDEO OUT/LCD/VF] menu [VF COLOR].
[STREAMING START] Assigns the function for starting or stopping streaming from the camera.
This is interlocked with the setting value in the [NETWORK] menu [STREAMING] [START].
(Factory setting: [REC CHECK])
[S.BLK LEVEL]
Sets the super black level.
The items that can be set are as follows.
f [30], [20], [10]
(Factory setting: [10])
@
NOTE
t This cannot be set when the [SYSTEM] menu [COLOR SETTING] [V-Log] is set.
[AUTO KNEE SW]
Enables/disables the auto knee function and the dynamic range stretcher function.
[DRS] The dynamic range stretcher function is enabled when the <OUTPUT>/<AUTO KNEE> switch is set to <ON>.
[ON] The auto knee function is enabled when the <OUTPUT>/<AUTO KNEE> switch is set to <ON>.
[OFF] The auto knee function and the dynamic range stretcher function are not enabled even if the <OUTPUT>/<AUTO KNEE>
switch is set to <ON>.
(Factory setting: [ON])
@
NOTE
t This cannot be set when the [SYSTEM] menu [COLOR SETTING] [V-Log] is set.
[SHD,ABB SW CTL]
Sets whether to automatically adjust black shading when the <AUTO W/B BAL> switch is pressed toward <ABB> side for two seconds or more.
Loading ...
Loading ...
Loading ...