Panasonic AJ-CX4000GJ Pro 4K/HDR Streaming Camcorder with B4 Lens Mount

User Manual - Page 218

For AJ-CX4000GJ.

PDF File Manual, 245 pages, Read Online | Download pdf file

AJ-CX4000GJ photo
Loading ...
Loading ...
Loading ...
218 –
Chapter 9 Network Connection — Streaming function
@
NOTE
t Stop the streaming with the operation in the receiving side.
t For details about the operations to start streaming from the application software, refer to the manual for the receiving side.
t Streaming cannot be started while the thumbnail screen is displayed.
r Streaming with multicast
One streaming can be distributed to multiple receivers via supported router, etc., when the multicast function is used.
1
Select the [NETWORK] menu [STREAMING] [RTSP SETTING] [MULTICAST] [ENABLE].
2
Select the [NETWORK] menu [STREAMING], and specify [MULTICAST ADDRESS] and [MULTICAST PORT].
f Set [MULTICAST ADDRESS] within following range.
IPv4: 224.0.1.0 to 239.255.255.254
IPv6: Multicast address starting with FF
f Set [MULTICAST PORT] within the range of 1024 to 50000.
3
Specify the address of the camera and start streaming with the application software.
@
NOTE
t Depending on the specication of the device receiving streaming and the connected router, quality of the video image may not be preserved. When
streaming by multicast, contact the administrator of the network being used and prepare appropriate communication environment.
t Disable the LAN card not to be used when receiving the multicast image to be displayed on a computer with multiple LAN cards installed.
t Range of streaming can be adjusted with the [NETWORK] menu [STREAMING] [RTSP SETTING] [TTL/HOP LIMIT]. For details, contact the
network administrator.
SRT CLIENT
1
Select the [NETWORK] menu [STREAMING] [STREAMING PROTOCOL] [SRT CLIENT].
2
Set the destination.
For details of setting the streaming destination, refer to “Setting of the destination” (page 219).
3
Select the [NETWORK] menu [STREAMING] [START] [ON].
If the camera is connected to the transmission destination through a network, the camera starts the transmission of streaming video.
f To stop the transmission of the streaming image, select the [NETWORK] menu [STREAMING] [START] [OFF].
@
NOTE
t Streaming in 23.98 Hz is not possible with SRT.
t [START] menu cannot be selected when the streaming cannot be started due to reasons such as the network is not connected, etc.
t Starting/stopping of the streaming from the camera can be assigned to the USER button. (page 136)
t Streaming cannot be started by pressing the USER button when the thumbnail screen is displayed.
t For settings such as URL, refer to the manual for each streaming service.
t Streaming may not be possible depending on the operating condition of the streaming service.
t Range of streaming can be adjusted with the [NETWORK] menu [STREAMING] [SRT SETTING] [TTL/HOP LIMIT]. For details, contact the
network administrator.
t Depending on the environment, the delay time can be adjusted with the [NETWORK] menu [STREAMING] [SRT SETTING] [LATENCY]. For
details, contact the network administrator.
t Settings of [DEST URL], [STREAM ID], [ENCRYPTION], and [PASSPHRASE] are not possible when [DATA TYPE] is set to [CLOUD]. Set this after
performing the operation for [CLEAR (MEMORY)] once.
SRT LISTENER
Start the streaming with an operation of the application software or device at the receiving side (referred to as “receiving side” hereinafter).
1
Select the [NETWORK] menu [STREAMING] [STREAMING PROTOCOL] [SRT LISTENER] in the camera.
2
Set following items with the [NETWORK] menu [STREAMING] [SRT SETTING] on the camera.
f Set the standby port with [LISTEN PORT].
f If the streaming data is to be encrypted, select the encryption method in [ENCRYPTION], and enter the passphrase in [PASSPHRASE].
3
Specify the IP address and the stream ID of the camera as following on the receiving side, and start streaming.
srt://(IP address):(Port number)
f The stream ID is xed to following value in the SRT LISTENER mode.
#!::m=publish,r=PanasonicStream
@
NOTE
t Streaming in 23.98 Hz is not possible with SRT.
t Stop the streaming with the operation in the receiving side.
t For details about the operations to start streaming from the application software, refer to the manual for each application software.
t Range of streaming can be adjusted with the [NETWORK] menu [STREAMING] [SRT SETTING] [TTL/HOP LIMIT]. For details, contact the
network administrator.
t Depending on the environment, the delay time can be adjusted with the [NETWORK] menu [STREAMING] [SRT SETTING] [LATENCY]. For
details, contact the network administrator.
t When the passphrase is blank, communication is performed without encryption even if [ENCRYPTION] is set to anything other than [OFF].
Loading ...
Loading ...
Loading ...