Panasonic AJ-CX4000GJ Pro 4K/HDR Streaming Camcorder with B4 Lens Mount

User Manual - Page 231

For AJ-CX4000GJ.

PDF File Manual, 245 pages, Read Online | Download pdf file

AJ-CX4000GJ photo
Loading ...
Loading ...
Loading ...
231 –
Chapter 10 Maintenance — Warning system
Screen display
Description Behavior and cause
Camera image screen
[Exceeds capacity. Please reselect.] The remaining recording capacity of the memory card for
the copy destination is insufcient.
A message is displayed.
f Select the clip to copy again, or secure enough space in
the remaining recording capacity on the memory card for
the copy destination.
[Check the destination media.] An error has occurred on the memory card for the copy
destination while copying.
A message is displayed.
f Conrm the memory card for the copy destination.
[LOAD NG] Loading of the scene le has failed. A message is displayed.
f Check the memory card.
[SAVE NG] Writing of the scene le has failed. A message is displayed.
f Check the memory card.
[DISCONNECT USB CABLE.] Due to an OS non-compatible error, ve minutes has
elapsed until the service mode connection is established.
A message is displayed.
f Conrm if the OS in use is supported by the camera.
[CARD LOCKED.] The camera tried to protect or delete a clip on a memory
card that has been locked.
The camera tried to copy a clip to the memory card that
has been locked.
A message is displayed.
f Unlock the memory card.
[CANNOT SELECT MORE CLIPS.] It has tried to select more than 99 clips. A message is displayed.
f Execute the process such as copying by every 99 clips.
[SELECT THE CLIP TO BE
DELETED.]
It has tried to delete a clip without choosing any. A message is displayed.
f Select a clip to be deleted.
[SELECT THE CLIPS TO COPY.] It has tried to copy a clip without choosing any. A message is displayed.
f Select a clip to be copied.
[SELECT THE CLIP TO RE-
CONNECT.]
It has tried to re-connect without choosing any clip. A message is displayed.
f Select the clip to be re-connected.
[NO CARD.] Copying was tried to be executed without inserting a
memory card into card slot.
A message is displayed.
f Insert a memory card into the card slot.
[REINSERT OR CHECK CARD
<SLOT 1>]/[REINSERT OR CHECK
CARD <SLOT 2>]/[REINSERT OR
CHECK CARD <SLOT 3>]
It has tried to copy to an error card. A message is displayed.
f Check the memory card.
[CANNOT RECORD.] Cannot be recorded. A message is displayed.
f Perform recording after making it possible.
[REC PAUSE INVALID] The camera tried to stop the next recording before the
previous recording nished writing to the memory card.
A message is displayed.
f Stop recording after writing to the memory card is
complete. Recording can be stopped after the message
that is displayed disappears.
[WRITE PROTECTED] The write-protected switch on the memory card is set to
the Protect side or the LOCK side.
A message is displayed.
f Insert a memory card with write access.
[ATW MODE] The camera tried to execute auto white balance while auto
tracking white balance function operated.
A message is displayed.
f Cancel the auto tracking white balance function and
execute auto white balance.
[AWB PRESET ****K]
The camera tried to execute auto white balance when the
<WHITE BAL> switch is set to <PRST>.
A message is displayed.
f Set the <WHITE BAL> switch to <A> or <B> and execute
auto white balance.
[AWB UNABLE]
[S.GAIN MODE]
The camera tried to execute auto white balance while
super gain function operated.
A message is displayed.
f Cancel the super gain function and execute auto white
balance.
[CHECK FILTER] The <ND FILTER>/<CC FILTER> dial is not set correctly
at power on.
The camera tried to execute auto white balance when the
<CC FILTER> dial was not set correctly.
A message is displayed.
f Correctly set the <ND FILTER>/<CC FILTER> dial.
f Correctly set the <CC FILTER> dial and execute auto
white balance.
[LOW LIGHT] Brightness has dropped. A message is displayed.
f Adjust the brightness.
Loading ...
Loading ...
Loading ...