Loading ...
Loading ...
Loading ...
– 89 –
Chapter 4 Operation — Menu settings
[BACK LIGHT]
Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.
The items that can be set are as follows.
f [−1], [0], [1], [2]
(Factory setting: [0])
[SELF SHOOT]
Sets the display of the LCD monitor when mirror shooting is performed.
[NORMAL] Does not invert the left and right sides.
[MIRROR] Inverts the left and right sides.
(Factory setting: [MIRROR])
[LCD/VF HDR]
Sets the output image from the LCD monitor and viewnder.
[SDR] Outputs in the standard dynamic range.
[HDR] Outputs in the high dynamic range.
(Factory setting: [HDR])
@
NOTE
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to anything other than [HLG], the camera image is output in the standard dynamic
range.
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] → [V-Log] is set.
[LCD/VF V-Log]
Sets the output signal from the LCD monitor and viewnder when the [SYSTEM] menu → [COLOR SETTING] → [V-Log] is set.
[V-Log] Outputs in same color as the recording image.
[V-709] Outputs after converting to an image suitable for preview.
(Factory setting: [V-Log])
@
NOTE
t This cannot be set when the [SYSTEM] menu → [COLOR SETTING] → [NORMAL] is set.
[INDICATOR]
Selects the indicator to display in the output image.
[INDICATOR SW]
Selects the status display method.
[ON] Status is displayed constantly.
[OFF] Normally, status is not displayed. This is displayed when the mode check screen is displayed by pressing the <MARKER
SEL>/<MODE CHECK> switch toward the <MCK> side.
(Factory setting: [ON])
[TC]
Displays/hides the time code, user bits, and counter.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[TC ON COLOR BAR]
Selects whether to display the time code, user bits, and counter when color bar is output.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[REC STATUS]
Sets whether to display [REC] during recording.
[ON] [REC] is displayed.
[OFF] [REC] is not displayed.
However, [REC] is displayed when set to the [OTHERS] menu → [LED] → [REC TALLY] → [CHAR].
(Factory setting: [OFF])
[REC MEDIA]
Displays/hides the setting status of the memory card format to record.
Loading ...
Loading ...
Loading ...