Loading ...
Loading ...
Loading ...
– 215 –
Chapter 9 Network Connection — Streaming function
Streaming function
You can perform streaming of audio and video currently shot with the camera over a network (wired LAN, wireless LAN, and USB tethering).
Streaming can be performed using the camera, an application software of a device connected via a network, or a server that is capable of receiving
streaming video sent from the camera.
There are two ways to start streaming: streaming from an application software and streaming from the camera. This section describes the camera's
network connection method for each method.
@
NOTE
t The streaming function cannot be simultaneously used with the recording function of the proxy data.
t Streaming stops when performing operations such as displaying the thumbnail screen or playing back clips on the camera.
t Streaming may stop when the date/time is set while streaming.
t If there is a setting that disables VFR and other streaming functions in the scene le, streaming will end due to the scene le changing.
t Take caution as streaming image may unintentionally be released depending on the system environment to stream on and setting of the service used.
Basic setting of the camera
Specifying the network settings
Specify the network settings. (page 205)
Settings for the streaming function
1
Set the [SYSTEM] menu → [FREQUENCY]/[REC FORMAT].
f For details about the setting items, refer to “Settings when using the streaming function” (page 215), “Settings when using the 4K streaming
function” (page 216).
2
Select the [NETWORK] menu → [NETWORK FUNC] → [STREAMING] or [STREAMING(4K)].
Streaming function is enabled.
3
Select the protocol with the [NETWORK] menu → [STREAMING] → [STREAMING PROTOCOL].
4
In the [NETWORK] menu → [STREAMING] → [STREAMING FORMAT], set the format when streaming.
f For details about the setting items, refer to “Settings when using the streaming function” (page 215), “Settings when using the 4K streaming
function” (page 216).
5
Set the setting corresponding to the selected protocol.
f For details on each protocol, refer to “Setting for each protocol and starting the streaming” (page 217).
@
NOTE
t The streaming function can be used when all of the following conditions are satised.
- The menu has been set according to “Settings when using the streaming function” (page 215)
(This cannot be used when set to UHD)
- Some special recording functions are disabled
- The [RECORDING] menu → [PROXY SETTING] → [PROXY REC] → [OFF] is set
t Recording and displaying of the thumbnail are not possible when [STREAMING(4K)] is selected.
t The 4K streaming function can be used when all of the following conditions are satised.
- The [SYSTEM] menu → [FILE FORMAT] is set to [MOV]
- The menu is set in accordance to “Settings when using the 4K streaming function” (page 216)
(This cannot be used when set to anything other than UHD)
- VFR and some special recording functions are disabled
t When the [SCENE FILE] menu → [GAMMA MODE SEL] is set to [HLG], video is streamed after converting from high dynamic range to standard
dynamic range.
t When the [SYSTEM] menu → [COLOR SETTING] is set to [V-Log], video is streamed after converting from V-Log to V-709.
r Settings when using the streaming function
The item that can be selected varies depending on the [STREAMING PROTOCOL] settings.
f For [SRT CLIENT] or [SRT LISTENER]: Only the steaming format with “*” in the table can be selected.
[SYSTEM] menu
[NETWORK] menu → [STREAMING]
[FREQUENCY] [REC FORMAT] [STREAMING FORMAT]
[59.94Hz] [1080-59.94p/AVC-I100]
[1080-59.94p/AVC-I422]
[1080-59.94p/AVC-G25]
[1080-59.94p/AVC-G12]
[1080-59.94p/422LongGOP 100M]
[1080-59.94p/422ALL-I 200M]
*[1920×1080-60fps 24M]
*[1920×1080-60fps 20M]
*[1920×1080-60fps 16M]
*[1280×720-60fps 14M]
*[1280×720-60fps 8M]
*[1280×720-60fps 3M]
[640×360-30fps 4M]
[640×360-30fps 1.5M]
[640×360-30fps 0.7M] (Factory setting)
[320×180-30fps 4M]
[320×180-30fps 1.5M]
[320×180-30fps 0.5M]
Loading ...
Loading ...
Loading ...