Panasonic AJ-CX4000GJ User Manual

Loading ...

– 20 –

Chapter 2 Description of Parts — Power supply and accessory mounting section

Power supply and accessory mounting section

4 5 6 7 8 1

16 17 11

1 Power switch

Switches between power on/standby.

To turn on, set the power switch to < j > (ON). To set to standby, set the power switch to < h > (standby).

฀@

NOTE

t Even when the power switch is set to the < h > (standby) position, the camera is not shut off from the main power.

2 Viewnder left/right positioning ring

To adjust the left/right position of the viewnder, loosen this ring, and slide the viewnder to the left or right to adjust it to an easy-to-view position.

After adjustment, turn in the <LOCK> direction and rmly clamp.

3 <VF> terminal

Mount the viewnder AG-CVF15G (optional), AJ-CVF50G (optional), etc.

4 Mount cap

Raise the lens lever to remove the cap. Replace the cap when the lens is not mounted.

5 Cable holders

Fix the cables for lens or microphone.

6 Lens mount

Mounts the 2/3-inch bayonet lens.

7 Tripod mount

Attaches the tripod adaptor SHAN-TM700 (optional). (bottom)

8 Lens lever

After mounting the lens to the lens mount, tighten the lens lever to secure the lens.

9 <LIGHT> switch

Select how to turn on/off the video light connected to the <LIGHT> terminal.

<AUTO>: When the video light is left turned on, the light is illuminated at the same time that recording starts on the camera and goes out at the

same time that recording stops.

<MANUAL>: The light is illuminated according to whether the video light is turned on/off.

10 Viewnder front/back positioning lever

To adjust the front/back position of the viewnder, loosen this lever, and slide the viewnder to the front or back to adjust it to an easy-to-view

position. After adjustment, turn in the <LOCK> direction and rmly clamp.

11 Shoulder strap mounting section

Mounts the supplied shoulder strap. (page 44)

12 Battery release lever

Used when removing the battery from the camera.

13 Battery holder

Mounts the Anton/Bauer battery (optional).

14 <DC IN> terminal

This is the input terminal for the external power supply. Connect to the external DC power supply.

15 <DC OUT> terminal

This is the DC12 V power supply output terminal. It provides a maximum current of 1.5 A.

฀@

NOTE

t Make sure that polarity is correct before connecting an external device. Doing so may result in a malfunction.

Loading ...

Panasonic AJ-CX4000GJ Pro 4K/HDR Streaming Camcorder with B4 Lens Mount

User Manual - Page 20