Loading ...
Loading ...
Loading ...
– 163 –
Chapter 5 Shooting — Display of the viewnder status
Item Description
[SLOT2] Displays the remaining capacity (%)/remaining capacity (minutes)/total
recording time of the memory card inserted in card slot 2.
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] →
[NDI|HX].
The status of the memory card that is displayed are following types.
f [NO CARD]: Memory card is not inserted.
f [UNSUPPORTED]: Memory card is not supported.
f [FORMAT ERROR]: Memory card cannot be used. (Format error)
f [PROTECTED]: It is write protected. The write-protected switch of the
memory card is set to the LOCK side.
f [NO REMAIN]: Memory card has no remaining capacity.
f [NOT SDXC]: Recording mode is set to MOV but SDXC memory card or
64 GB microP2 card is not inserted.
f [ENCRYPTED]: microP2 card formatted with encryption with CPS password
is inserted.
In cases other than above, the remaining capacity of the memory card is
displayed in 0% through 100%.
[SLOT3] Displays the remaining capacity (%)/remaining capacity (minutes)/total
recording time of the memory card inserted in card slot 3.
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] →
[NDI|HX].
The status of the memory card that is displayed are following types.
f [NO CARD]: Memory card is not inserted.
f [UNSUPPORTED]: Memory card is not supported.
f [FORMAT ERROR]: Memory card cannot be used. (Format error)
f [PROTECTED]: It is write protected. The write-protected switch of the
memory card is set to the LOCK side.
f [NO REMAIN]: Memory card has no remaining capacity.
f [NOT SDXC]: Recording mode is set to MOV but SDXC memory card or
64 GB microP2 card is not inserted.
f [ENCRYPTED]: microP2 card formatted with encryption with CPS password
is inserted.
In cases other than above, the remaining capacity of the memory card is
displayed in 0% through 100%.
AUDIO screen
Displays the audio input/output settings and the recording level.
Item Description
[MIC POWER(MENU)]
Displays the setting value of the [AUDIO] menu → [INPUT SETTINGS] →
[FRONT MIC POWER] and the [AUDIO] menu → [INPUT SETTINGS] →
[REAR MIC POWER].
[VOL. SELECT]
Displays the setting value of the [AUDIO] menu → [REC CH SETTINGS] →
[VOL. SELECT].
[A.IN] [CH1] to [CH4] Displays the audio input signal selected with the <AUDIO IN CH1> to <AUDIO
IN CH4> switches.
[LEVEL] [CH1] to [CH4] Displays the recording level adjustment method of each channel.
f [AUTO]: Automatic adjustment
f [VOL.]: Manually adjusted by the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL
CH2/4> dial
f [MENU]: Manually adjusted by the [AUDIO] menu → [REC CH SETTINGS]
→ [CH1 LEVEL CONTROL] to [CH4 LEVEL CONTROL]
[F.VOL.] [CH1] to [CH4] Displays whether the <F.AUDIO LEVEL> dial is enabled in each channel.
f [ON]: Enabled
f [OFF]: Disabled
Settings in the <AUDIO IN CH1> to <AUDIO IN CH4> switch and the
[AUDIO] menu → [REC CH SETTINGS] → [FRONT VOL. CH1] to [FRONT
VOL. CH4] does not match.
f [---]: Disabled
The channel is not selected in the [AUDIO] menu → [REC CH SETTINGS] →
[VOL. SELECT].
[LIMITER] [CH1] to [CH4] Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when recording level adjustment method is automatic adjustment.
[LOWCUT] [CH1] to [CH4] Displays enable/disable of low-cut lter for each channel with [ON]/[OFF].
CAC screen
Displays information about the chromatic aberration compensation function.
[CAC CONTROL]
Displays the setting value of the [CAMERA] menu → [CAC ADJ.] → [CAC CONTROL].
[STOP] is displayed when the chromatic aberration compensation function is not active due to conditions of the data or
the lens even if set to the [CAMERA] menu → [CAC ADJ.] → [CAC CONTROL] → [ON].
[CAC MODE] Displays the operation mode of the chromatic aberration compensation function.
f [AUTO]: The CAC le is automatically selected.
Loading ...
Loading ...
Loading ...