Loading ...
Loading ...
Loading ...
– 25 –
Chapter 2 Description of Parts — Shooting and recording/playback functions section
Shooting and recording/playback functions section
Shooting and recording (Camera unit)
2
5
4
4
3
6
7 8 9 10
1
1 <SYNCHRO SCAN> button
Adjusts the shutter speed of synchro scan in the synchro scan mode.
Pressing the <−> button slows down the shutter speed. Pressing the <+> button increases the shutter speed.
For example, when shooting a computer monitor, adjust to a position where the noise for the horizontal bar in the viewnder will be reduced.
2 <CC FILTER>/<ND FILTER> dial
Select the lter to suit the luminance or color temperature of the subject.
Position of <CC FILTER>
dial (large diameter)
Setting Description
<A> <3200 K> Sets the color temperature to 3200 K.
<B> <4300 K> Sets the color temperature to 4300 K.
<C> <5600 K> Sets the color temperature to 5600 K.
<D> <6300 K> Sets the color temperature to 6300 K.
Position of <ND FILTER>
dial (small diameter)
Setting Description
<1> <CLEAR> Does not use the ND lter.
<2> <1/4ND> Reduces the amount of light entering the MOS sensor to 1/4.
<3> <1/16ND> Reduces the amount of light entering the MOS sensor to 1/16.
<4> <1/64ND> Reduces the amount of light entering the MOS sensor to 1/64.
Refer to the following table to switch the <CC FILTER> and <ND FILTER> dials according to the shooting conditions.
Shooting conditions <CC FILTER> dial <ND FILTER> dial
Sunset, sunrise, inside studio <A> (<3200 K>) <1> (<CLEAR>)
Outdoors in the clear skies
<B> (<4300 K>) or <C> (<5600 K>) or <D>
(<6300 K>)
<2> (<1/4ND>) or <3> (<1/16ND>)
Outdoors under cloudy skies or in the rain <D> (<6300 K>) <1> (<CLEAR>) or <2> (<1/4ND>)
Clear, bright scenery such as snowy scenery,
tall mountains, seaside
<B> (<4300 K>) or <C> (<5600 K>) or <D>
(<6300 K>)
<3> (<1/16ND>) or <4> (<1/64ND>)
3 Focal plane index <
>
Indicates the focal plane of the MOS sensor.
Use this mark as a reference for measuring the accurate focal distance from the subject.
4 USER button
The function selected by the user can be assigned to the <USER 1> to <USER 5> buttons. Pressing the USER button performs the assigned
function.
5 <SHUTTER> switch
Switches the electronic shutter.
<OFF>: Disables the electronic shutter.
<ON>: Enables the electronic shutter.
<SEL>: Changes the shutter speed.
It is a spring switch. Shutter speed is changed each time pressed toward the <SEL> side.
Loading ...
Loading ...
Loading ...