Loading ...
Loading ...
Loading ...
– 161 –
Chapter 5 Shooting — Display of the viewnder status
No Display item name Menu item and selection of display/hide
Switching display/hide in
the normal screen
Playback
screen
STATUS
[INDICATOR SW]
[ON] [OFF]
37 Gain [GAIN]
l l
— —
l
38 Auto knee — — — — —
l
39 Color temperature [WHITE BALANCE]
l l
—*
6
—
l
40 Audio level meter [AUDIO LEVEL METER]
l l
— —
l
41 Filter position [FILTER]
l l
— —
l
42 Extender [EXTENDER]
l l
— —
l
43 Remote control status in an IP
connection
— — — — —
l
44 Error display of auto black
balance
— — — — —
l
45 Error display of auto white
balance
— — — — —
l
46 Message display area — —
l l l l
47 Message for invalid lter
position
— —
l l
—
l
48 Clip name [CLIP NAME]
l l
—
l*
1
*
7
l
49 Recording format [REC FORMAT]
l l
— —
l
50 System resolution/system
frequency
[REC FORMAT]
l l
— —
l
*1 Not displayed when the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [INDICATOR SW] → [OFF] is selected.
*2 Only [REC] is displayed.
*3 Status of the card slot 1 is displayed when the [RECORDING] menu → [REC MEDIA] is set to [expressP2], and the status of the card slot 2 is displayed when
set to [microP2/SD].
*4 Displayed when the remaining capacity of the memory card or remaining battery level gets low.
*5 Displayed when the setting value of the iris override function is changed.
*6 Displayed when the color temperature is changed with color temperature change function.
*7 The display position differs in the playback screen. For details, refer to “Screen display during playback” (page 159).
Mode check display
The camera settings and status can be displayed on the viewnder or LCD monitor screen for check.
Mode check STATUS screen is displayed when the <MARKER SEL>/<MODE CHECK> switch is pushed towards the <MCK> side when camera image
screen is displayed.
Every time the <MARKER SEL>/<MODE CHECK> switch is pressed to the <MCK> side, display is switched in the order of STATUS screen, !LED
screen, FUNCTION screen, AUDIO screen, CAC screen, SWITCH screen, NETWORK screen, and camera image screen.
Each screen of the mode check is displayed for approximately ve seconds.
The screen does not switch while the <MARKER SEL>/<MODE CHECK> button is being pressed to the <MCK> side.
Press the <EXIT> button while each screen is displayed to return to the camera image screen.
[ON]/[OFF] display in each screen can be selected in the [VIDEO OUT/LCD/VF] menu → [MODE CHECK INDICATOR].
For details on STATUS screen displays, refer to “Checking and displaying shooting status” (page 159).
!LED screen
Displays the items to cause the [!] lamp of the viewnder to illuminate.
f [!] is displayed for items set to [ON] in the [VIDEO OUT/LCD/VF] menu → [!LED].
f [!] is displayed with black and white inverted when an item, to which [ON] is set in the [VIDEO OUT/LCD/VF] menu → [!LED], is cause of [!] lamp to be
illuminated.
[GAIN(0dB)]
Displays the gain status.
[AGC] is displayed when the [CAMERA] menu → [AGC] → [AGC] → [ON] is set.
[DS.GAIN] Displays the digital super gain value.
[SHUTTER]
Displays the shutter status.
f [1/****]: Displays the shutter speed.
f [w1/*****]: Displays the shutter speed in time (minutes) when synchro scan function is enable and the [SCENE FILE]
menu → [SYNC SCAN TYPE] → [sec] is set.
f [w*****d]: Displays the shutter speed in open angle when synchro scan function is enable and the [SCENE FILE] menu
→ [SYNC SCAN TYPE] → [deg] is set.
f [HALF]: Displays when the [CAMERA] menu → [SHUTTER SPEED] → [POSITION1] to [POSITION6] → [HALF] is set and the
position is selected.
f [OFF]: Shutter function is disabled.
[WHITE PRE.]
Displays the white balance status.
Displays the position selected with the <WHITE BAL> switch or the following.
f [ATW]: Displayed when the auto tracking white balance is operating. Flashes when luminance level and color temperature are
outside the range.
f [LOCK]: Displayed when the auto tracking white balance is locked.
[EXTENDER] Displays the status of the extender.
[B.GAMMA] Displays the status of black gamma.
Loading ...
Loading ...
Loading ...