Loading ...
Loading ...
Loading ...
– 188 –
Chapter 6 Playback — Thumbnail operation
Playback operation Operating procedure
Playback/pause
Touch [=/&] or press the <PLAY/PAUSE (=/&)> button.
Fast-reverse playback
Touch [%] or press the <REV (%)> button. Touch twice to increase the speed.
Fast-forward playback
Touch [)] or press the <FWD ())> button. Touch twice to increase the speed.
Stop (return to thumbnail screen)
Touch [(] or press the <STOP (()> button.
Skip playback
(cue up of the clip)
Touch the LCD monitor while playing back, and slide from right to left (left to right).
When sliding from left to right, the clip skips to the beginning of the previous clip if the current playback
position of the clip is at less than three seconds from the beginning. The clip skips to the beginning of the
current clip if the current playback position of the clip is at three seconds or more from the beginning.
Skip playback is also possible by pressing the <FWD ())> button or <REV (%)> button while paused.
Slow playback
Touch and hold [&=] during pause.
Touch and hold [~&] for reverse slow playback.
It will perform slow playback with continuous frame-by-frame while [&=] is touched.
f Touch [=/&] or press the <PLAY/PAUSE (=/&)> button to return to normal playback.
f The frame-by-frame interval and the display time for each frame for the reverse slow playback differ
depending on the type of the clip.
Frame-by-frame playback
Touch [&=] during pause.
([~&] is for reverse frame-by-frame playback)
f Touch [=/&] or press the <PLAY/PAUSE (=/&)> button to return to normal playback.
f The frame-by-frame interval for reverse frame-by-frame playback differs depending on the type of the
clip.
Direct playback Touch the direct playback bar, or slide it while touching.
f The playback video is paused during the operation. Playback is started by releasing the nger.
@
NOTE
t Operations of the camera or some performance may become slow for the clip with large le size.
t Operations of the camera or some performance may become slow when there are large number of clips on the memory card.
t Playback will stop once by switching the card slot when MOV is selected as the recording le format, and the [THUMBNAIL] menu → [PLAYBACK] →
[CLIP SEL] → [ALL SLOT]/[SAME FORMAT] is set, and the clips of all the memory cards are displayed. Playback is not possible across two memory
cards.
t If selecting P2 as recording le format and playing back a clip that was recorded by relay recording and spans between two memory card, playback
will pause and a black screen will be displayed when switching the card slot. Playback will automatically restart after the switch.
t Playback stops when the memory card is removed during playback.
t During playback of a clip, playback may be suspended or black screen may be displayed due to switching of a clip.
Loading ...
Loading ...
Loading ...