Panasonic AJ-CX4000GJ Pro 4K/HDR Streaming Camcorder with B4 Lens Mount

User Manual - Page 67

For AJ-CX4000GJ.

PDF File Manual, 245 pages, Read Online | Download pdf file

AJ-CX4000GJ photo
Loading ...
Loading ...
Loading ...
67 –
Chapter 4 Operation — Menu settings
[LENS FILE ADJ. MODE]
Selects the mode to adjust the lens.
When transferred from the [LENS FILE ADJ. MODE] setting screen, it is forcefully switched to [OFF].
[ON]
The gains of Rch and Bch adjusted in the [SCENE FILE] menu [RB GAIN CONTROL SETTING] and the are level of
Rch, Gch, and Bch adjusted in the [SCENE FILE] menu [RGB BLACK CONTROL SETTING] are disabled.
[OFF]
The gains of Rch and Bch adjusted in the [SCENE FILE] menu [RB GAIN CONTROL SETTING] and the are level of
Rch, Gch, and Bch adjusted in the [SCENE FILE] menu [RGB BLACK CONTROL SETTING] are enabled.
(Factory setting: [OFF])
[LENS R GAIN OFFSET]
Corrects the Rch sensitivity of the lens to use.
The items that can be set are as follows.
f [200]…[200]
(Factory setting: [0])
[LENS B GAIN OFFSET]
Corrects the Bch sensitivity of the lens to use.
The items that can be set are as follows.
f [200]…[200]
(Factory setting: [0])
[LENS R FLARE]
Adjusts the Rch are level.
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [0])
[LENS G FLARE]
Adjusts the Gch are level.
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [0])
[LENS B FLARE]
Adjusts the Bch are level.
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [0])
[AGC]
[AGC]
Sets the operation of the auto gain control.
[ON] Performs the operation of the [AGC] function that automatically adjusts camera gain.
[OFF] Does not perform the operation of the [AGC] function that automatically adjusts camera gain.
(Factory setting: [OFF])
@
NOTE
t The setting is xed to [OFF] when the [SCENE FILE] menu [GAIN/ISO MODE] [ISO] is set.
[AGC LIMIT]
Sets the maximum gain value during [AGC] operation.
The items that can be set are as follows.
f [3dB], [6dB], [12dB], [18dB]
(Factory setting: [6dB])
@
NOTE
t This cannot be set when the [SCENE FILE] menu [GAIN/ISO MODE] [ISO] is set.
[AGC POINT]
Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.
The items that can be set are as follows.
f [F2.8], [F4.0], [F5.6]
(Factory setting: [F4.0])
@
NOTE
t This cannot be set when the [SCENE FILE] menu [GAIN/ISO MODE] [ISO] is set.
Loading ...
Loading ...
Loading ...