Loading ...
Loading ...
Loading ...
SINAMICS G120C
List Manual (LH13), 04/2014, A5E33840768B AA
315
2 Parameters
2.6 Quick commissioning (p0010 = 1)
If p0010 = 1 is selected, p0003 (user access level) can be used to select the parameters that
are to be accessed.
At the end of the quick commissioning, set p3900 = 1 to perform the required motor
calculations and reset all other parameters (not included in p0010 = 1) to their default settings.
p1900 Motor data identification and rotating
measurement
2C(1)T
p1905 Parameter tuning selection 1 C(1)T
p3900 Completion of quick commissioning 1 C(1)
Note
This only applies for the quick commissioning.
Table 2-7 Quick commissioning (p0010 = 1), continued
Par. no. Name Access level Changeable
Loading ...
Loading ...
Loading ...