Loading ...
Loading ...
Loading ...
2 Parameters
2.1 Overview of parameters
SINAMICS G120C
14 List Manual (LH13), 04/2014, A5E33840768B AA
BICO: Full parameter name / abbreviated name
The following abbreviations can appear in front of the BICO parameter name:
G120C variants
Specifies for which G120C variants (communication) the parameter is valid is. If no G120C
variant is listed, then the parameter is valid for all variants.
The following information relating to "G120C variants" can be displayed under the parameter
number:
• BI: Binector Input
This parameter is used for selecting the source of a digital signal.
• BO: Binector output
This parameter is available as a digital signal for interconnection with other
parameters.
• CI: Connector Input
This parameter is used for selecting the source of an "analog" signal.
• CO: Connector output
This parameter is available as an "analog" signal for interconnection with other
parameters.
• CO/BO: Connector/Binector Output
This parameter is available as an "analog" and digital signal for interconnection
with other parameters.
Note
A BICO input (BI/CI) cannot be interconnected with just any BICO output (BO/CO, signal
source).
When interconnecting a BICO input using the commissioning software, only the corresponding
possible signal sources are listed.
Function diagrams 1020 ... 1030 explain the symbols for BICO parameters and how to deal
with BICO technology.
Table 2-1 Information in the "CU/PM variants" field
CU/PM variants Meaning
All G120C variants have this parameter.
G120C_CAN G120C with CAN interface
G120C_DP
G120C with PROFIBUS interface
G120C_PN
G120C with PROFINET interface
G120C_USS
G120C with USS interface
Loading ...
Loading ...
Loading ...