Loading ...
Loading ...
Loading ...
Waveform Analysis
R&S
®
RTB2000
79User Manual 1333.1611.02 ─ 03
●
All logic channels if at least one logic is active (with option R&S RTB-B1).
●
Decoded bus data if the bus is active (with at least one serial protocol option
R&S RTB-K1, -K2, or -K3).
To set the number of segments
1. Press the ACQUISITION key in the Horizontal area of the front panel.
2. Select the "Record Length". The number of available segments depends on the
record length.
See also:
"Record Length" on page 50.
6.4.2 Segment Table
The memory segments are always written when an acquisition is running. When you
activate the history, the acquisition stops and the segment table opens. The segment
table shows the index and timestamp of all history segments, and also all functions to
view the segments that are stored in the memory.
The history segments store the data of the currently active channels. You can acquire
several channels at once, and display and analyze the channels individually.
To activate the history
1. Tap the "Menu" icon.
2. Select "History".
The acquisition stops, and the segment table is shown.
Run / Stop
Starts and stops the playback of the history segments.
Remote command:
...:HISTory:STATe
Prev.
Steps back to the next older segment.
History and Segmented Memory (Option R&S RTB-K15)
Loading ...
Loading ...
Loading ...