Loading ...
Loading ...
Loading ...
Trigger
R&S
®
RTB2000
55User Manual 1333.1611.02 ─ 03
RUN STOP
Starts and stops the continuous acquisition. A green light indicates a running acquisi-
tion. A red light shows that acquisition is stopped. At slow timebases, a yellow light
indicates that the acquisition is ongoing.
The status is shown also at the right end of the information bar: "Run", "Complete",
"Trig?" (waiting for trigger, in normal trigger mode) or "Not ready" (working). For slow
timebases, the status "Pre" or "Post" is shown together with an indicator that shows the
filling level of the buffer.
Remote command:
RUN on page 251
RUNContinous on page 251
STOP on page 251
ACQuire:STATe on page 251
SINGLE
Starts a specified number of acquisitions. A white light indicates that the instrument is
in single mode. The information bar shows "Complete" if the acquisition has been fin-
ished.
To set the number of acquisitions, press the ACQUISITION key and enter "Nx Single".
Remote command:
SINGle on page 251
RUNSingle on page 251
5.2 Shortcuts for Trigger Settings
To adjust the trigger source, mode, and trigger type specific settings, you can use the
shortcuts on the top of the display. The labels show the current values.
1 = adjust the trigger source
2 = open the keypad to enter the value of the trigger level or threshold
3 = adjust slope or polarity
4 = adjust the trigger mode
5 = start or stop a continuous acquisition, or start a single acquisition if SINGLE is active
6 = available settings depend on the trigger type
Shortcuts for Trigger Settings
Loading ...
Loading ...
Loading ...