Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
375User Manual 1333.1611.02 ─ 03
Parameters:
<Polarity> POSitive | NEGative
POSitive: rising slope
NEGative: falling slope
*RST: POS
BUS<b>:SPI:MOSI:SOURce <MosiSource>
BUS<b>:SPI:MISO:SOURce <MisoSource>
BUS<b>:SPI:DATA:SOURce <Source>
Selects the input channel of the data line.
Suffix:
<b>
.
1 | 2
Parameters:
<Source> CH1 | CH2 | CH3 | CH4 | D0..D15
D0..D15: requires MSO option R&S RTB2000-B1
*RST: CH1
BUS<b>:SPI:MOSI:POLarity <MosiPolarity>
BUS<b>:SPI:MISO:POLarity <MisoPolarity>
BUS<b>:SPI:DATA:POLarity <Polarity>
Selects whether transmitted data is high active (high = 1) or low active (low = 1) on the
data line.
Suffix:
<b>
.
1 | 2
Parameters:
<Polarity> POSitive | NEGative
POSitive = high active
NEGative = low active
*RST: POSitive
BUS<b>:SPI:BORDer <BitOrder>
Defines if the data of the messages starts with MSB (most significant bit) or LSB (least
significant bit).
Suffix:
<b>
.
1 | 2
Parameters:
<BitOrder> MSBFirst | LSBFirst
*RST: MSBFirst
Serial Bus Analysis
Loading ...
Loading ...
Loading ...