Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
377User Manual 1333.1611.02 ─ 03
Suffix:
<b>
.
1 | 2
Parameters:
<Polarity> POSitive | NEGative
POSitive: rising slope
NEGative: falling slope
*RST: POSitive
BUS<b>:SSPI:MOSI:SOURce <MosiSource>
BUS<b>:SSPI:MISO:SOURce <MisoSource>
BUS<b>:SSPI:DATA:SOURce <Source>
Selects the input channel of the data line.
Suffix:
<b>
.
1 | 2
Parameters:
<Source> CH1 | CH2 | CH3 | CH4 | D0..D15
CH3 and CH4 are only available with 4-channel instrument.
*RST: CH1
BUS<b>:SSPI:MOSI:POLarity <MosiPolarity>
BUS<b>:SSPI:MISO:POLarity <MisoPolarity>
BUS<b>:SSPI:DATA:POLarity <Polarity>
Selects whether transmitted data is high active (high = 1) or low active (low = 1) on the
data line.
Suffix:
<b>
.
1 | 2
Parameters:
<Polarity> POSitive | NEGative
POSitive = high active
NEGative = low active
*RST: POSitive
BUS<b>:SSPI:BITime <BurstIdleTime>
Within the idle time the data and clock lines are low. A new frame begins when the idle
time has expired and the clock line has been inactive during that time. If the time inter-
val between the data words is shorter than the idle time, the words are part of the
same frame.
Suffix:
<b>
.
1 | 2
Serial Bus Analysis
Loading ...
Loading ...
Loading ...