Loading ...
Loading ...
Loading ...
Remote Control Commands
R&S
®
RTB2000
310User Manual 1333.1611.02 ─ 03
Parameters:
<SignalSource> CH1..4 | MA1 | RE1..4 | D0..15
Waveform to be measured, required for all measurement types.
For delay and phase measurements, it is the "Measure Source".
CH1 | CH2 | CH3 | CH4
Active signal channels 1 to 4
MA1
Active math channel
RE1 | RE2 | RE3 | RE4
Active reference channels 1 to 4
D0..D15
Active digital channels D0...D15. Only available, if MSO option
R&S RTB-B1 is installed.
<SignalSource2> None | CH1..4 | MA1 | RE1..4 | D0..15
Second waveform, reference source that is required for delay
and phase mesurements ("Reference Source").
MEASurement<m>:DELay:SLOPe <SignalSlope>,<ReferenceSlope>
Sets the edges to be used for delay measurement. The associated waveforms are
defined with
MEASurement<m>:SOURce.
Parameters:
<SignalSlope> POSitive | NEGative
Slope of first waveform ("Measure Source").
*RST: POS
<ReferenceSlope> POSitive | NEGative
Slope of the reference waveform ("Reference Source").
*RST: POS
MEASurement<m>:STATistics[:ENABle] <StatisticEnable>
Activates or deactivates the statistical evaluation for all active measurements.
Suffix:
<m>
.
1..4
The suffix is irrelevant.
Parameters:
<StatisticEnable> ON | OFF
*RST: OFF
Measurements
Loading ...
Loading ...
Loading ...